To clear the interface counters, use the clear counters EXEC command.
#RJ45 56K LOOPBACK PLUG MANUAL#
Refer to the appropriate hardware manual for slot and port information. (Optional) Forces a reload of the PROM image, regardless of any Flash image. Number of the LAN Extender interface corresponding to the LAN Extender to be rebooted. With a Packet over SONET Interface Processor)Ĭlear controller lex (for Cisco 7500 series with ports on VIP cards) clear controller lex number Ĭlear controller lex slot / port (for Cisco 7500 series routersĬlear controller lex (Cisco 7200 series and for the Cisco 7500 series To reboot the LAN Extender chassis and restart its operating software, use the clear controller lex privileged EXEC command. (Optional) Specifies the line speed (in kilobits per second) of the T1 or E1 link. For an E1 controller, the timeslot range is from 1 to 31. For a T1 controller, the timeslot range is from 1 to 24. Timeslot or range of timeslots belonging to the channel group. When configuring an E1 data line, channel-group numbers can be values from 0 to 30. When configuring a T1 data line, channel-group numbers can be values from 0 to 23. access-list access-list-number ]Ĭhannel-group number. Use the no form of this command to remove a single access list entry. Use the access-list global configuration command to establish MAC address access lists. Note In Cisco IOS Release 11.3, all commands supported on the Cisco 7500 series are also supported on the Cisco 7000 series.
For more information about defaults and usage guidelines, see the corresponding chapter of the Configuration Fundamentals Command Reference.
This chapter describes the function and displays the syntax for interface commands.
0 kommentar(er)
